Manual
ibaBM-PN
26
Issue 1.9
8.
If you want to connect the device with one or two devices to PROFINET, you first
have to configure the controller (see chapter 10.1).
9.
Add a module under the ibaBM-PN device. Click with the right mouse-button on the
ibaBM-PN device and select "Add module" and the module "Device slot“ from the list.
10.
With this module, you access a slot of the PROFINET device of ibaBM-PN.
If you want to operate more devices, then add more modules of the “Device slot“ type.
11.
Now, enter the “No analog signals“ and “No digital signals“ in the “General” tab of the
module. The default setting is 32; a maximum of 252 analog and 1024 digital signals
can be assigned per module. This value determines the length of the signal tables on
the “Analog“ and “Digital“ tabs.
12.
Enter in the “Analog“ tab the signals you want to acquire in sequential order. Assign
a name to each signal (“Name“ column) and define in the “Address“ and “Data type“
columns the information about where to find the signal on the interface of the device.