IBA BM-PN, Manual, Page: 35 / 77

ibaBM-PN Manual
Issue 1.9
35
9.2.2 „Device 0/1“ node
The „Device 0/1“ node shows information about the respective internal PROFINET de-
vice: the current status, the PROFINET device name, the MAC address and the slot
configuration.
Figure 18: “Device 0/1“ node

Status, Device mode, Device name, MAC address
Display of current states/values

IP address, Subnet mask, Default gateway
Display of current states/values

Change mode
A click on the button <Change mode> opens a dialog for setting the device mode.
The following options are available:

PROFINET Device: normal operating mode as PROFINET device

SINAMICS Emulation: Mode for data acquisition at the SINAMICS Link with only
one participant. Description of the settings, see chapter 9.2.8.4.

Assign name
A click on the button <Assign name> opens an entry form, where you can enter a
device name.

Reset to factory defaults
With a click on the button <Reset to factory defaults> all settings of the PROFINET
device will be reset to factory defaults, see chapter 9.2.1.4.

Reboot
A click on the button <Reboot> reboots the PROFINET device.
Slot configuration table
The table shows the slot configuration. The configuration is written to the device by the
connected PROFINET controller. The columns have the following meanings:

Slot
Slot number

Module
Module type