- 8 -
LIGHT BULB REPLACING
SEASONAL USE
When the unit is kept unused for a long time, please take note of the following procedures:
- unplug the unit;
- clean and dry well the unit;
- leave the door of the storage compartment open, in order to avoid bad odours;
-cover the unit with a curtain, place it in a dry room and sheltered from the atmospheric agents.
DISPOSAL
The cabinet contains oil, plastic and metallic components and glass. To guarantee the best respect of the
environment , never abandon the equipment outside. The demolition of the cabinet and the recovery of the
component materials must be carried out according to the local regulations in force in this matter.
INFORMATIONS ABOUT SERVICE
MODELS ASIA - FENICE
1) Isolate the neon tube by acting
light switch
2) Extract the neon cover line by
first pulling it out
3) Pull out the tube
MODELS EDERA - AFRIKA
1) Isolate the neon tube by acting
light switch
2) Extract the neon cover line by
first pulling it out
3) Rotate and pull out the tube
MALFUNCTIONS AND REMEDIES
Most of the functioning inconveniences are generally due to simple causes or to defective electrical
connections. These problems can usually be solved on the place.
The unit does not start
:
-check that there's voltage at the wall socket;
-check that the unit is properly plugged.
The internal temperature is not cold enough
:
-check that the unit is not adjacent to sources of heat;
-check that there is not too much ice on the evaporator;
-check the electronic control thermostat position;
-check that the condenser is not blocked by dirt;
The unit is noisy
:
-check that all bolts and screws are tightened;
-check that the unit is levelled;
-check that none of the fan blades is touching any part of the body.
