Page 2 2019-05-10 [email protected]
C. Highlighted Features and Specifications
Five independent voltage rails
Two 3.3V LifePO4 battery direct isolated voltage rails for clock and DAC section.
Two 3.3V-13.2V battery direct isolated voltage rails for analog section and other sensitive circuits. Each of
the rails can be configured as 3.3V, 6.6V, 9.9V or 13.2V separately.
Additional 5V 2A linear LT3042 regulated DC output for digital section (non-isolated, can be
enabled/disabled).
Smart battery management.
End charge voltage can be programmed from the OLED GUI
Battery run time can also be programmed from the OLED GUI.
Equipped with protections, such as over current, over charge and over discharge protection as well as relay
protection.
Charging voltage, current and status can be monitored and displayed at real-time.
Multiple LifePO4 power supplies can be bridged together to get more voltage rails.
OLED control board can be beaked from main PCB in order to move to front panel.
Programmable screensaver function to protect OLED from screen burn-in.
Can use either 26650 battery cells with tabs or standard 26650 battery holders.
D. Layout and Dimensions (in mm)
