MAN-072
7
2.3- INSTALLATION CARBURETTOR
INSTALL THE GAS CABLE CLAMP ON THE
SUPPORT
(SEE FIG. 5)
12 POINT WRENCH 10mm
REMOVE THE 2 3.5mm SCREWS ON THE CARB.
PUMP (IN CORRESPONDENCE OF THE
THROTTLE LEVER).
(SEE FIG. 6)
SCREWDRIVER 4.8 mm / Torx T20
INSTALL THE SUPPORT BRACKET AND THE TWO
SCREWS.
SCREWDRIVER 4.8 mm / Torx T20
(SEE FIG. 7)
INSTALL THE INTAKE SILENCER SUPPORT
(2x SCREWS M5x10.)
(ALLEN WRENCH 3 mm)
(SEE FIG. 8)
POSITIONING CARBURETTOR
x
REMOVE THE 2 M6 NUTS.
x
REMOVE THE PLASTIC PROTECTION
PLUG
x
LEAVE THE GASKET ON THE ENGINE
AND INSTALL IN THIS WAY (SEE FIG.9):
-
CARBURETTOR
TIGHTEN THE CARBURETTOR M6 NUTS AT 6
÷ 10 Nm.
Fig.5
Fig.9
Fig.6
Fig.7
Fig.8