MAN-072
6
2.2- EXHAUST MANIFOLD INSTALLATION
NOTE:
THE ENGINE IS SUPPLIED WITH AN EXHAUST CARD BOARD COVER TO PROTECT THE INTERNAL PARTS.
THE EXHAUST GASKET AND STUD BOLTS ARE ALREADY MOUNTED.
REMOVE THE NUTS AND THE EXHAUST CARD
BOARD COVER
.
MAKE SURE THAT THE EXHAUST GASKET IS IN
SEAT AND INSTALL THE EXHAUST MANIFOLD.
(SEE FIG. 1)
INSERT THE 2 ELASTIC WASHERS 8mm
SUGGESTION:
PUT THE ENGINE IN HORIZONTAL POSITION
AND PLACE THE WASHERS IN THEIR SEAT.
HELP YOURSELF WITH A SCREWDRIVER.
INSTALL 2 COLOMN NUTS.
TIGHTEN TO 18 ÷ 22 Nm.
SUGGESTION:
EASIER TIGHTENING (as per Fig. 2) WITH A
REDUCED EXTERNAL DIAMETER SOCKET
WRENCH OR WITH AN OPEN WRENCH.
12 POINT ELBOWED WRENCH 13 mm (or 13mm OPEN WRENCH)
Fig.1
Fig.2