MAN-072
9
2.5
INSTALL THE ENGINE ON THE
CHASSIS
POSITION THE ENGINE ON THE 2 OUTSIDE
MAIN RAILS AND FIX THE MOTOR-MOUNT WITH
THE TWO CLAMPS.
(SEE FIG.11)
SUGGESTION:
NEVER TORQUE COMPLETELY THE CLAMPS
UNTIL THE CHAIN IS INSTALLED AND PROPERLY
ALIGNED.
CHECK THE ALIGNMENT OF THE ENGINE
SPROCKET AND THE AXLE SPROCKET WITH A
STRAIGHT EDGE.
(SEE FIG. 12).
INSTALL THE CHAIN (PITCH: 7.775).
(SEE FIG. 13)
MOVE THE ENGINE ON THE RAILS TO ADJUST
THE CHAIN TENSION.
ATTENTION:
THE PLAY OF THE CHAIN MUST BE APPR. 16mm
(1/2 ÷ 3/4 inch) MEASURED IN THE SHOWN
POINT.
(SEE FIG. 14)
COMPLETELY TIGHTEN THE ENGINE MOUNT
SCREWS.
Fig.11
Fig.12
Fig.13
Fig.14
15mm