12
MAN-88 – UK
3.6
INSTALL THE CLUTCH COVER
-REMOVE THE 3 SCREWS M6x30 ON THE
CRANKCASE (SEE FIG. 18) AND INSTALL THE
CLUTCH COVER.
TORQUE THE 3 SCREWS AT 8 ÷ 10 Nm (70 ÷ 90
in-lb)
5 mm ALLEN WRENCH
3.7 ELECTRICAL CONNECTION
-CONNECT THE COIL CABLE (SMALL ONE) TO THE
TERMINAL ON THE COIL.
-CONNECT THE COIL CABLE AT THE TERMINAL ON
THE ON/OFF SWITCH.
-
INSTALL THE SPARK PLUG ON THE CYLINDER
HEAD AND INSTALL THE SPARK PLUG CAP. MAKING
SURE THAT THE SPARK PLUG CAP IS WELL
INSERTED IN THE SPARK PLUG.
HEXAGONAL PIPE WRENCH 20.8mm
TOURQUE SPARKPLUG AT 20÷26 Nm (175÷230 in-
lb)
THE ENGINE IS READY TO BE STARTED
FIG. 20
