11
MAN-88 – UK
3.5
INSTALL ENGINE ON THE CHASSIS
-
POSITION THE ENGINE ON THE 2 MAIN RAILS AND
FIX THE MOTOR-MOUNT WITH THE TWO CLAMPS.
SUGGESTION:
NEVER TORQUE COMPLETELY THE CLAMPS UNTIL
THE CHAIN IS INSTALLED AND PROPERLY ALIGNED.
-
CHECK THE ALIGNMENT OF THE ENGINE
SPROCKET AND THE AXLE SPROCKET WITH A
STRAIGHT EDGE.
-
INSTALL THE CHAIN
(PITCH : 7.775mm)
-
MOVE THE ENGINE ON THE RAILS AND OPTIMIZE
THE CHAIN TENSION.
ATTENTION:
THE PLAY OF THE CHAIN MUST BE APPR. 15mm
(
½
÷
¾
inch) MEASURED IN THE SHOWN POINT (SEE
FIG)
-
TORQUE THE CLAMP SCREWS
15mm
