IAI Robo Cylinder CON-T, Instruction Manual

Page: 95 / 118

84 8
6.
Operation:
Mode
Flow
Chart
6.8 User Parameters
6.8.1 User Parameters
Parameters are displayed and edited.
Press the key.
Each parameter can be changed using the or
key.
When the cursor is located at “No.,”it is also
possible to change to the desired user parameter by
directly inputting a numeric value of theparameter
No. with the ten key and pressing the Return key.
When changinga parameter, move the cursor to the
parameter value with the
, , or
key or Return key.
Input a numeric value with the ten key and press the
Return key.
Press the key.
The screen will change to the next screen. Press the
key.
When “1” (Yes) is selected for “Is the writing data
written?,”the screen will change to the Software
Reset screen.
Press the key and press the Return key.