IAI ELECYLINDER TB-03, Instruction Manual

Page: 16 / 114

8
ME0375-4A
Handling Precautions
•
In touch panel teaching pendant TB-03, the language to be displayed can be changed.
Refer to the following for how to change it.
• ELECYLINDER 3.1 Displayed Language Change
•
Do not apply mechanical shocks on TB-03, because they may cause failure.
• If using the LCD screen for a long time, the brightness decreases. In order to extend the life of
LCD, set the time setting to turn off in the environment setting to turn it off automatically, turn it off
in case not used.
•
Do not touch more than one point at the same time, because the touch panel is an analog
resistive film system. If you touch more than one point, the center position of more than one point
may react and operate.
•
Operate the touch panel by 0.5 N force or less.
There is a risk that the panel will be broken if it is operated by stronger force than that.
•
The life of the touch panel is around one million times under the condition of depression at the
same point. (Based on the usage environment of 25
°
C)
•
It is recommended to have distance between TB-03 and ELECYLINDER of 5m or less with no
interruption.
The connection may get unstable even in distance of 5m or less depending on the peripheral
environment of use.
Also, be aware that, even if an axis is displayed in the wireless axis select window with distance
over 5m, the connection could get unstable as the distance goes far.
•
For a SD memory card, choose a SD/SDHC memory card with 1G to 32G. (Toshiba-made
recommended) Also, use FAT32 Format for the file system.
International Standards Compliances
This TB-03 comply with the following international standards:
Refer to Overseas Standard Compliance Manual (ME0287) for more detailed information.
If it is necessary to announce EC Declaration of Conformity with this product built in your facility, as
this product itself declares the conformity to EU Directives in some specific conditions as stated
below, you would be able to utilize this declaration.
EU Directives Applicable for EC Declaration of Conformity
EMC Directive (2014/30/EU) • • • • • To be checked in CE marking described in product nameplate.
RoHS Directive (2011/65/EU) • • • • Same as above.
RE Directive (2014/53/EU) • • • • • • To be checked in EC Declaration of Conformity.
EC Declaration of Conformity proving conformity to RE Directive may be modified without notice
according to addition of conformed models, specification change and so on. Visit our homepage
(http://www.iai-robot.co.jp/) or contact our sales site if necessary.
CE Marking
UL
RoHS Directive EMC Directive
Radio Equipment
Directive
○ ○ ○ -