IAI ELECYLINDER TB-03, Instruction Manual

Page: 100 / 114

5. Error Display
92
ME0375-4A
Code Message Contents, occurring cases, and countermeasures
132 Detect Undefined Controller
An unsupported controller was recognized.
Follow the process in [6.2 Teaching Update] to
have you controller updated to the applicable
version or later. Refer to [Supported Models] for
the applicable version.
160 SDcard open error
File cannot open.
Example:
Backup was performed without SD card
inserted.
161 SDcard write error
SD card cannot be written.
Example:
Backup was performed under the following
conditions.

Free space of the SD card is insufficient.

SD card write-protect switch is engaged.

File is set to the write prohibit property in
overwriting.

An unsupported SD card is inserted.
162 SDcard read error
SD card cannot be read.
Example:
If a SD card is not inserted or files cannot be
read, at the time of restoring.
164 SDcard file format error
File format is not matched.
Example:
If the content of the file which will be restored
are different from the file format defined by data
types.
181 Controller init complete Messages to confirm the operation
(It is not to say any operation mistake or abnormal
occurrence)
184 Data transfer completed
186 Time setting completed
187
Brownout of RTC backup
battery
Voltage of the battery inside the teaching pendant
is reduced.
(Note)
Settings for time, languages, and touch operation
sound are initialized.
Consult us about replacing the battery.
188 Input warning of below Min. Vel
The velocity, which is less than the "minimum
velocity" that depends on the lead and encoder
pulses, was entered in the "velocity" of position
data.
The message is displayed, but entering data is
possible.
Retype a proper value after the confirmation of the
specification, because the movement in less than
the minimum velocity may cause abnormal noise
and vibration.