IAI EC ELECYLINDER EC-RP4, Instruction Manual, Page: 178 / 208

8-11
8. Maintenan
ce and Inspection
[TC/TW table guide]
(1) With the power off, pull out the table.
If the rod bracket will not move at low lead, connect to the PC software or teaching
pendant to move the table.
(2) From the grease lubrication port, apply the designated grease (TC: 0.2 to 0.4cc,
TW: 0.1 to 0.3cc) with a syringe, etc.
TW4 has different grease ports on the right and left guide; apply grease to both.
(3) Move the table to apply the grease thoroughly.
[TC] [TW]
[Table guide grease port cross-section figure]
Move the table to the stroke end to match the table grease port with the table guide
grease port.
Insert the syringe from the table grease port and apply grease to the table guide grease
port.
Be careful not to let the grease leak to the exterior.
* To release the brake, refer to
Brake
release method
(page 3-3)
8.5 Greasing method
Grease port (left/right collective) Grease port (right)
Grease port (left)
Syringe, etc.
Table
Table guide