CV-M77
- 3 -
4. Locations and Functions
1
Lens mount of C-mount type. *1)
2
1/3" CCD sensor with primary color mosaic filter. (Bayer filter).
3
R Gain Potentiometer. To adjust Red gain level manually.
4
B Gain Potentiometer. To adjust Blue gain level manually.
5
MG Gain Potentiometer. To adjust Master gain level manually.
6
6 pin connector for RS 232C signals, input of ext. trigger pulse and WEN output.
7
12 pin connector for +12V DC power and HD/VD input/output.
8
9 pin D-Sub connector for RGB video output, video sync. and pixel clock output.
9
Switch to set shutter speed and function mode.
10
Screw holes for tripod mounting plate (optional plate)
11
4 M3 mounting threads. *2)
*1)
Note
:
Rear protrusion on C-mount lens must be less than 6mm (0.24-inch approx.)
*2)
Note
:
Notice depth of thread is only 5mm. Too long screws may harm inside electronics.
Fig. 1. Locations
