IAI AP-3200T-PMCL, User Manual

Page: 63 / 76

— 63 —
AP-3200T- PMCL
Item Setting range Default value Description
PulseGeneratorLength 1 to 1048575 30000 Set the maximum count-up value as
a clock count.
PulseGeneratorLength
(ms)
1 / PulseGeratorClock
(MHz) to 1048575 /
PulseGeneratorClock
(MHz)
66.6667 Set the maximum count-up value in
milliseconds.
This value is calculated using the
[PulseGeneratorLength] value as a
base.
The setting range varies depending
on the [ClockPreScaler] value.
PulseGenerator
Frequency(Hz)
((PulseGeneratorClock
(MHz)) ÷ 1048575) x
1000000 to
(PulseGeneratorClock
(MHz) x 1000000)
15 Set the maximum count-up value as
a frequency.
This value is calculated using the
[PulseGeneratorLength] value as a
base.
PulseGeneratorStart
Point
0 to 1048574 0 Set the start point of the High
interval as a clock count.
When the counter reaches this
value, the output will be 1.
PulseGeneratorStart
Point(ms)
0 to (1048575 /
PulseGeneratorClock
(MHz))
0 Set the start point of the High
interval in milliseconds.
When the counter reaches this
value, the output will be 1.
The setting range varies depending
on the [ClockPreScaler] value.
PulseGeneratorEnd
Point
1 to 1048575 15000 Set the start point of the Low
interval as a clock count.
When the counter reaches this
value, the output will be 0.
PulseGeneratorEnd
Point(ms)
(1 /
PulseGeneratorClock
(MHz)) to (1048575 /
PulseGeneratorClock
(MHz))
33.3333 Set the start point of the Low
interval in milliseconds.
When the counter reaches this
value, the output will be 0.
The setting range varies depending
on the [ClockPreScaler] value.
PulseGeneratorPulse
width(ms)
– 33.3333 Display the High interval width of
the pulse in milliseconds.
The duration between the Start
Point and End Point is calculated.
The setting range varies depending
on the [ClockPreScaler] value.
PulseGenerator
RepeatCount
0 to 255 0 Set the repeat count for the counter.
When this is set to [0], a free
counter is enabled with no repeat
limit.
PulseGeneratorClear
Activation
Off,
LevelHigh,
LevelLow,
RisingEdge,
FallingEdge
Off Set the clear signal condition for the
count clear input of the pulse
generator.
PulseGeneratorClear
Source
Low,
High,
AcquisitionTriggerWait,
AcquisitionActive,
FrameTriggerWait,
FrameActive,
ExposureActive,
FVAL,
LVAL,
PulseGenerator0-3,
User Output0-3,
Line5-OptIn1,
Line6-OptIn2,
Nand0Out,
Nand1Out
Low Select the count clear input signal
source.
[Line4 TTL In] can be used on the
Standard Model.
PulseGeneratorClear
Inverter
True, False False Select whether to invert the polarity
of the count clear input signal.
PulseGeneratorClear
SyncMode
AsyncMode,
SyncMode
AsyncMode Select the sync mode for the count
clear input signal.