IAI AP-3200T-PMCL User Manual Download

Page: 11 / 76

— 11 —

AP-3200T-

PMCL

Preparation

Preparation Process

Step 1

Installing the Software (first time only)

Install the software for configuring and controlling the camera (JAI SDK) on the computer.



Step 2

Connecting Devices

Connect the lens, LAN cable, AC adapter, computer, and other devices.



Step 3

Verifying Camera Operation

Verify whether the camera is turned on and ready for use.



Step 4

Verifying the Connection between the Camera and PC

Verify whether the camera is properly recognized via Control Tool.



Step 5

Changing the Camera Settings

Refer to the procedure for changing the output format setting as an example, and change

various settings as necessary.



Step 6

Adjusting the Image Quality

Refer to the procedures for adjusting the gain, white balance, and black level as examples,

and adjust the image quality.



Step 7

Saving the Settings

Save the current setting configurations in user memory.

Step 1: Installing the Software (first time only)

When using the camera for the first time, install the software for configuring and controlling

the camera (JAI SDK) on the computer.

When you install JAI SDK, JAI Camera Control Tool will also be installed.

Download the “JAI - Getting Started Guide” and JAI SDK from the JAI

website.

URL: http://www.jai.com/en/support/download-jai-software

Refer to the “JAI - Getting Started Guide,” and install JAI SDK on the

computer.

The computer will restart when installation is complete.

Note

When the JAI SDK is installed, a camera driver for the GigE interface is also part of the default

installation. This GigE Vision Filter Driver is added to every NIC/port on the host computer. As the driver

is also added to the NIC/port for Internet connection, it may, on some systems, affect Internet access

speed. If you think your Internet speed is affected, configure the following settings to disable the filter

driver on that port.

Open [Control Panel]



[Network and Internet]



[Connect to a network], and right-click

the port used for Internet connection to open the properties dialog box.

Caution

JAI SDK Version 3.0.2 or later is required to use this camera model.

Summary of Contents for AP-3200T-PMCL













































































Search results

Summary of Contents for AP-3200T-PMCL

Reviews:

Related manuals for AP-3200T-PMCL

Brands by name

Popular brands

IAI AP-3200T-PMCL, User Manual

Search results

Summary of Contents for AP-3200T-PMCL

Reviews:

Related manuals for AP-3200T-PMCL

Brands by name

Popular brands