© 2013 I-View Now, LLC. All Rights Reserved.
Nuvico EasyNet ED-P Series Installation Guide rev 1.0
Page 5
Network Setup
After logging into the device for the first time, the first setting that should be changed is the IP address. The DVR
requires a static internal IP address because one or more communication ports will have to be forwarded to it from the
firewall or router on site.
Click the setup Menu Icon
Select the Advanced Setup Tab
Click Network
The following network setting information should typically
be obtained from the site’s IT staff. Any DNS server that can
resolve ivnview.com may be used, but 8.8.8.8 and 8.8.4.4
are google’s public DNS servers. Use them if the location’s IT
staff does not have a preferred DNS server.
Ensure DHCP is not checked
Enter The Static IP address for the DVR
Enter the subnet Mask
Enter the default Gateway
Enter 8.8.8.8 for DNS1
Enter 8.8.4.4 for DNS2
If port 7000 is already in use, another port may
be assigned here. If available, default port 7000
may be used
Click Save to finalize settings
The Setup Menu is located at the Top right hand corner of the screen. It is not displayed
until being moused over.
Setup Menu->Advanced tab->Network Menu
Setup Menu->Advanced tab->Network Menu->Network
