background image

4   www.i-sens.com

www.i-sens.com  5

Important Information: Read This First!

To receive safe and optimum system benefits, please read the 

entire manual contents before using the system. Please note 

the following instructions:

•   Do not use the system for diagnosis or screening of diabetes.

•  Use only fresh capillary whole blood samples for testing.

•   Alternative site and fingertip test results may differ 

significantly due to rapid changes in the blood glucose level 

after eating, insulin injection or exercise.

Intended Use

The CareSens N Voice Blood Glucose Monitoring System is 

intended for the quantitative measurement of glucose in fresh 

capillary whole blood samples drawn from the fingertips and 

alternative sites such as the forearm, palm, thigh, and calf. 

Alternative site testing should be used only during steady-state 

blood glucose conditions. The CareSens N Voice Blood Glucose 

Monitoring System is intended for self testing outside the body 

(

in vitro

) by people with diabetes at home as an aid to monitor 

the effectiveness of diabetes control. The system is intended to 

be used by a single person and should not be shared. It is not 

intended for use on neonates and is not for the diagnosis or 

screening of diabetes.

The CareSens N Single Blood Glucose Test Strips are for use with 

the CareSens N Voice Blood Glucose Meter to quantitatively 

measure glucose in fresh capillary whole blood samples drawn 

from the fingertips and alternative sites.

The CareSens Control Solutions are for use with the CareSens N 

Voice Meter and CareSens N Single Test Strips to check that the 

meter and the test strips are working together properly and that 

the test is performing correctly.

•   The CareSens N Voice Blood Glucose Monitoring System is 

intended for 

in vitro

 (outside the body) diagnostic use only 

and for the quantitative measurement of glucose in capillary 

whole blood.

•   The CareSens N Voice Blood Glucose Monitoring System is 

intended for use by a single user only. Do not share the meter 

and lancing device with another person.

•   The CareSens N Voice Blood Glucose Meter is designed to 

minimize code related errors in monitoring by using the 

no-coding function.

•   The glucose in the blood sample mixes with special chemicals 

on the test strip to produce a small electrical current. The 

CareSens N Voice Meter converts this electrical current to 

glucose concentration.

•   The CareSens N Voice Blood Glucose Meter should be used 

only with the CareSens N Single Test Strip.

•   An abnormally high or low red blood cell count (hematocrit 

level over 60% or below 20%) may produce inaccurate results.

•   Inaccurate results may occur in severely hypotensive 

(having low blood pressure) individuals or patients in shock. 

Inaccurate low results may occur for individuals experiencing a 

hyperglycemic (high blood sugar) or hyperosmolar state, with 

or without ketosis. Critically ill patients should not be tested 

with blood glucose meters.

•   All parts of the kit are considered biohazardous and can 

potentially transmit infectious diseases, even after you have 

performed pre-cleaning and disinfection.

•    For questions or concerns, contact Customer Service: 1-800-

429-5001 (9 am - 9 pm EST, Mon - Sat). At all other times 

or in case of emergency, please contact your healthcare 

professional or emergency medical response.

Important Health-Related Information

Summary of Contents for CareSens N Voice






























Reviews: