background image

22   www.i-sens.com

www.i-sens.com  23

Comparing the Control Solution Test Results

The test result of each control solution should be within the 

range printed on the label of test strip vial. Repeat the control 

solution test if the test result falls outside of this range. Out of 

range results may occur due to the following factors:

If results continue to fall outside the range printed on the test 

strip vial, the CareSens N Voice Meter and CareSens N Single 

Test Strip may not be working properly. Do not use your system 

and contact Customer Service: 1-800-429-5001 (9 am - 9 pm 

EST, Monday - Saturday).

Note:

 

The CareSens Control Solutions can be purchased 

separately. Contact Customer Service: 1-800-429-5001.

•   When the control solution bottle was not 

shaken well,

•   When the meter, test strip, or the control 

solution were exposed to high or low 

temperatures,

•   When the first drop of the control solution 

was not discarded or the tip of the vial was 

not wiped clean,

•   

When the meter is not functioning properly.

•   When the control solution is past the 

expiration date printed on the bottle,

•   When the control solution is past its 

discard date (the date the bottle was 

opened plus three (3) months),

•   When the control solution is contaminated.

Situations

Actions

Repeat the 

control solution 

test by referring 

to the “Notes” on 

page 18.

Discard the used 

control solution 

and repeat the 

test using a new 

bottle of control 

solution.

CAUTION : To reduce the chance of infection

 

•   All components that come into contact with blood 

samples should be considered to be biohazards capable of 

transmitting viral diseases, even after disinfection.

•   Do not use a lancet that has been used by another person 

and never share your meter and lancing device with anyone.

•   Wash your hands thoroughly with soap and water after 

handling your meter, lancing device, or test strips.

•   Keep your meter and lancing device clean. See the            

pre-cleaning and disinfection section on page 41.

Note:

 

Repeated puncturing at the same sample site may 

cause pain or skin calluses (thick hard skin). Choose a different 

site each time you test.

Using the Lancing Device

You will need a lancing device in order to collect a blood 

sample. You may use the lancing device contained in the 

CareSens N Voice Blood Glucose Monitoring System or any 

other medically approved lancing device.

Adjustable Tip

Lancet Holder

Sliding Barrel

Release Button

Ejection System

Lancet

•   The lancing device is for use by a single user only and should 

not be shared with anyone including other family members.

Summary of Contents for CareSens N Voice






























Reviews: