background image

42   www.i-sens.com

www.i-sens.com  43

•   We have validated 

Clorox Germicidal Wipes

 with 0.55% 

sodium hypochlorite as the active ingredient for disinfecting 

the CareSens N Voice Meter and lancing device. It has been 

shown to be safe for use with the meter and lancing device. 

This disinfectant is available commercially in towelette form. 

In addition to CareSens N Voice BGMS instruction, 

please read 

the instructions provided by the manufacturer of Clorox 

Germicidal Wipes before using it.

Note: 

The disinfectant products can be purchased online 

retailers (e.g. Amazon) or by telephone at the manufacturer. 

To find out where to purchase the disinfectant product, 

please contact the manufacturer or visit their website as listed 

above.

Name
Manufacturer

EPA registration 

number

Active

ingredients

Clorox® Germicidal Wipes

Clorox Professional Products Company

[Phone] 1 800 537 1415

[Website] www.cloroxprofessional.com

67619-12

Sodium Hypochlorite: 0.55%

    

Pre-cleaning and Disinfection Procedures:

Open the cap of the

Clorox Germicidal

Wipes container

 and

pull out 1 towelette 

and close the cap.

Pull out 1 new towelette 

and wipe the entire surface 

of the meter 3 times 

horizontally and 3 times 

vertically using the 

new towelette to remove

blood-borne pathogens.

Wipe the entire surface of the meter 3 times horizontally

and 3 times vertically using one towelette to pre-clean blood 

and other body fluids.

Dispose of the used towelette in a trash 

bin.

Front

Back

Both sides

Summary of Contents for CareSens N Voice






























Reviews: