6
Connect the power plug of the Power cable - C7 to the power socket.
Put the
IS540.x
or the battery into the corresponding charging slot of the desktop charger.
The respective status LED on the desktop charger changes from green to red.
When the
IS540.x
or battery is fully charged, the respective status LED on the
desktop charger changes from red to green.
On the
IS540.x
, the status LED on the display shows the charging status.
NOTICE
Charging the
IS540.x
and battery at the same time extends the charging time.
POSSIBLE DEVICE PROBLEMS
You can find information on possible device problems and how to rectify them at
www.isafe-mobile.com/en/support/service
under the menu item
“FAQ”
.
If you have any further questions, please contact the
i.safe MOBILE GmbH
repair service at
www.isafe-mobile.com/en/support/service
MAINTENANCE/REPAIR
The device itself has no serviceable parts.
WARNING
Incorrect repairs present a risk of explosion or fire, which can result in death or severe injuries!
Do not open the device or carry out any repairs yourself.
Contact the
i.safe MOBILE GmbH
repair service at
www.isafe-mobile.com/en/support/service
if the device is not working normally, if the
device needs to be repaired or if a replacement part is required.
RETURN SHIPMENT
Contact the
i.safe MOBILE GmbH
repair service at
www.isafe-mobile.com/en/support/service
DISTRIBUTION PARTNER
You can find the specialist distribution partner responsible for your country at
www.isafe-mobile.com/en/contact
CLEANING
NOTICE
Incorrect cleaning can cause damage to the device. Please note the following when cleaning:
Disconnect the device from the power socket before cleaning.
Remove the
IS540.x
or battery from the desktop charger.
Do not use chemical agents for cleaning.
Clean the device and the Power Adapter with a soft, moistened antistatic cloth.