11
Major operating controls and their functions
Front view
①
Operation indicator [OPERATE]
Lights when the power is on.
②
Error indicator [ERROR]
Blinks when an error that can become a problem for the
recorder to run the system occurs.
Blinks red:
System error
Blinks orange:
Thermal error, cooling fan malfunction, etc.
Shows a solid light when automatically reset from an
error status.
③
HDD status indicator [HDD1] [HDD2] [HDD3] [HDD4]
Indicates the operational status (access/failure) of the
respective hard disk drive.
Blinks green:
Indicates that the respective hard disk
drive is being accessed.
Lights red:
Indicates that a fault (or an error) has
occurred on a hard disk drive.
Off:
Indicates that the respective hard disk drive is not
being accessed.
④
Recording indicator [REC]
Lights orange when recording is being performed.
⑤
Alarm indicator [ALARM]
Blinks when an alarm occurs, and lights when the alarm
output stops. This indicator will go off when the [Reset]
button (
☞
Operating Instructions) is clicked.
⑥
Front cover
⑦
Copy port (USB3.0) [COPY]
Connect an external storage device (external Hard disk
drive, USB memory) to this port and copy images and
audio recorded on the hard disk drive. An external
storage device can also be connected to the copy port
on the rear. Use one of them.
⑧
Mouse connection port (USB2.0) [
]
The included mouse is connected to this port.
⑨
Buzzer stop button [BUZZER STOP]
Press this button to stop the buzzer that started sound-
ing at an alarm/error occurrence. Refer to the Operating
Instructions for further information about alarms and
errors.
⑩
Decorative cover
①②
⑤
③
④
⑨
⑦ ⑧
⑩
⑥
