18
Rear view
①
Alarm/Control connector B [B]
It is used when connecting an alarm, such as a buzzer
or a lamp, to external equipment.
The provided terminal plug (10 pin) is attached.
②
Alarm/Control connector A [A]
It is used when connecting with an external device such
as a sensor or anti-theft door switch that output alarm
signals.
The provided terminal plug (11 pin) is attached.
③
Security wire hole
Mount the lock device for the anti-theft security wire.
④
Cable clamp fixing hole (for fixing the terminal
block cables)
This is a fitting hole for the cable clamp(provided) to tie and
fix the terminal block cables. Refer to
☞
⑤
Copy port (USB3.0) [COPY]
Connect an external storage device (external Hard disk
drive, USB memory) to this port and copy images and
audio recorded on the hard disk drive. An external
storage device can also be connected to the copy port
on the front. Use either of them.
* Mouse connection is also available.
⑥
Mouse connection port (USB2.0) [MOUSE]
The provided mouse is connected to this port. The
mouse can be connected to the mouse connection
ports on the front. Use either of them.
⑦
Network port (PC port) [PC]
Connect the recorder with a PC via a network compati-
ble with 10BASE-T, 100BASE-TX or 1000BASE-T. Use
this port when the cameras and the PC are connected
to different network.
⑧
Network port (Camera/PC port) [CAMERA/PC]
Connect the recorder with a PC and cameras via a
network compatible with 10BASE-T, 100BASE-TX or
1000BASE-T. When the port is being accessed, the
access indicator (green) blinks. When the port is being
linked, the link indicator (orange) lights.
Camera/PC
Access indicator
Link indicator
PC
LAN (10/100/1000 BASE-T)
⑨
Audio output connector (RCA pin jack)
[AUDIO OUT]
Connect such device as a powered speaker. Same
audio output to the main monitor will be output from this
connector.
⑩
Video output connector (BNC) [VIDEO OUT]
Connect a sub monitor (BNC) to this connector. Same
images output from the sub monitor output connector
(HDMI) will be output from this connector.
The default is NTSC output for WJ-NX300K and PAL
output for WJ-NX300K/G. The setup menu will not be
displayed.
⑪
Main monitor output connector (HDMI)
[A/V OUT MAIN]
This connector is used to connect to an HDMI-ready
monitor (the main monitor). It displays live images,
recorded images, or the setup menu of the recorder.
⑫
Sub monitor output connecter (HDMI)
[VIDEO OUT SUB]
This connector is used to connect to an HDMI-ready moni-
tor (sub monitor). Only the live images will be displayed.
⑬
Cable clamps fixing holes
Fit the cable clamp (provided with the extension unit) to fix
the connection cable. Refer to the operating instructions
of the extension unit WJ-HXE400 for further information.
⑭
External storage connector [EXT STORAGE (5 V 50 mA)]
Connect the optional extension unit (WJ-HXE400) to this
connector using the dedicated connection cable provided
with the extension unit.
Make sure to connect the extension units in order from
external storage connector number 1.
Major operating controls and their functions
(continued)
①
②
⑤
⑦ ⑧
③
④
⑨ ⑩ ⑪
⑫
⑬ ⑭
⑮ ⑯
⑰
⑥
