6
1
Rack mounting
☞
2
Connections
☞
3
Turn on the devices
☞
4
Assemble HDD unit
☞
5
Installation of HDD unit
☞
Install the extension unit in the rack.
Go to step
2
when not installing it in the rack.
Connect the extension unit to the recorder.
Turn on the power of the extension unit.
Turn on the power of the extension unit before turning on the
power of the recorder.
Encase an HDD in the HDD canister.
Remove the "HDD unit holding bracket" of the recorder and
install the HDD unit.
The removed "HDD unit holding bracket" is necessary when
transporting the recorder. Keep it in an appropriate place.
• Professional knowledge on and experience in network and the HDD are required for
the settings and changes of the operation.
• The PC is required for reading the Important Information.
Operations flow
Installation flow
The installation flow of the extension unit is as follows.
About the operation
The extension unit requires the recorder to set the operational mode of the HDD units or format them. Perform the setting using
the connected recorder.
Refer to the Operating Instructions of a corresponding recorder for further information.
