CABLINE-UM Instruction Manual
Document No.
HIM-18033-04EN
10
/
15
Confidential C
CAUTION
・Do not lift lock cover finger hook inward or excessive force applied to the connectors may
damage them.
・Do not unmate a cable connector by pulling cable.
・When withdrawing the connector, we recommend that you pull the finger perpendicular to PCB.
When removing one side (cable pitch direction) first, please do not apply load to the top of
the connector. (see Fig.)
・Allowable mating angle is shown in Fig.15. When the jig is lifted up to un-mate the cable connector,
The unmating angle must be with in this tolerance.
Fig.19 Allowance connector mating angle
Fig.17
2° MAX.
2° MAX.
Fig.18
Do not apply load
