CABLINE-UM Instruction Manual
Document No.
HIM-18033-04EN
5
/
15
Confidential C
【Connector Insertion Manual】
１．Which direction to mate
As shown in Fig.1, make sure to place a cable on non-soldered tail side.
Fig.1 Fig.2 Correct Connector Mating View
CAUTION
Do not mate the connector while cable is at soldered tail side.
Fig.3
・As shown in Fig.4 and 5, Please set it so that both ends of PLUG are located within the "[ ]" of silk
print on PCB.
Fig.4 With Lock cover Fig.5 Without Lock cover
Soldered tail side
Cable
Inside silk print on
PCB
Silk print on PCB
The shape of plug
The shape of plug
Silk print on PCB
Inside silk print on
PCB
Non-soldered tail side
Non-soldered tail side
Soldered tail side
