CABLINE-UM Instruction Manual
Document No.
HIM-18033-04EN
8
/
15
Confidential C
【How to Withdraw Cable Connector by pull jig】
①
Lift a lock cover finger hook outward on one end and repeat it again on opposite side to release lock cover.
Make sure that the inner lock part is completely released. (see Fig.12)
②
Slide the “pull jig” from the side of a cable and attach to the cable connector.(see Fig.13)
③
The jig shall be moved until it reach a stopper just as it hold the cable connector .(see Fig.14)
④
Lift up the jig vertically to the PCB surface.(see Fig.15)
Fig.12
Fig.13
Fig.14
The front view
The side view
LOCK
The front view
The side view
The back view
Stopper
