EN-1
6
of a TV are stored in the smart remote
control. The available preset buttons are
ON/OFF, FUNCTION, ENTER, TV VOL+/
VOL-, TV CH+/CH-.
NOTE:
During the learning process, the normal
remote control functions are disabled.
1 Place the smart remote control (A)
within 5mm-50mm distance from TV
remote control (B).
2 Press and hold LEARN button for 2
seconds to activate the learning mode.
A red indicator on the smart remote
control (A) lights up.
3 Press one of the TV (learning zone)
buttons on the smart remote control
(A), the red indicator flashes.
4 Press the button on TV remote control
(B) that is to be stored on the smart
remote control (A). When the code is
received successfully, the red indicator
flashes 3 times, then turns red again. If
the red indicator flashes but not turn
red, code received is not successfully.
5 Repeat steps 3-4 to program more
buttons on the smart remote control (A).
6 Press LEARN to save the learning and
then to exit the learning mode.
Basic Operations
Turn On/Off
When you connect TV or an external
device to the unit, unit will turn on
automatically. Auto Power indication
light is green (connect to LINE IN 1) or
yellow (connect to LINE IN 2). And will
turn red when disconnected or when
you turn off TV / external device.
NOTE:
If the volume of TV or an external
device is too low, the unit also turn off
automatically.
Adjust Volume Level
During play, press the /-
buttons to increase/decrease the
volume level.
If the unit is connected to the TV’s
headphne jack, you can also control
the Volume Level by using the TV’s
remote control set directly.
Super Bass Boost
Press the RS-BASS button to turn on the
bass, the indicator flashes for a longer
time (abouts 1s-2s). Press this button
again to turn off the bass, the indicator
flashes for a shorter time (about 0.5s-1s).
Mute Sound
During play, press the MUTE button to
mute or restore sound. Press this button
again or VOL+/VOL - buttos to cancel
the effect.
Program Smart Remote Control to
Control TV
Y o u c a n s t o r e a t o t a l o f 7 m o s t
frequently used function of you TV in
the TV (learning zone) of smart remote
control. This feature allows you to use
only one remote control to operate all
of your TV.
By default, the remote control codes
