MagicSurfer 56K
User’s Guide
Page 29
0
Rings to auto-answer
Set the number of rings required before the modem answers. 0 setting
disables auto-answer.
Range: 0 - 255 rings
Default: 0 (auto-answer disabled)
1 Ring
counter
Count the number of rings before the modem answers.
Range: 0 - 255 rings
Default: 0
2 Escape
character
Define the character used for the three-character escape code sequence.
0 setting disables the escape code character.
Range: 0 - 127
Default: 43 (+)
3
Carriage return character
Define the character for carriage return
Range: 0 - 127
Default: 13 (carriage return)
4
Line feed character
Define the character for line feed
Range: 0 - 127
Default: 10 (line feed)
5 Backspace
character
Define the character for backspace
Range: 0 - 127
Default: 8 (backspace)
6
Wait before dialing
Set the length of time to pause after off hook before dial.
Range: 2 - 255 seconds
Default: 2 seconds
7
Wait for carrier after dial
Set the length of time that the modem waits for a carrier from the remote
modem before hanging up.
Range: 1 - 255 seconds
Default: 50 seconds
8
Pause time for dial delay
Set the length of time to pause for the pause dial modifier “,”.
Range: 0 - 255 seconds
Default: 2 seconds
9
Carrier detect response time
Define the length of time a signal is detected and qualified as a carrier.
Range: 1 - 255 tenths of a second
Default: 6 (0.6 second)
10
Lost carrier hang up delay
Set the length of time the modem waits before hanging up for a carrier
