i-mate JAMA, User Manual, Page: 78 / 176

72 -mate | User Manual
5. Enter your name, user name, and password.
6. Enter your account information.
7. Input your server information that is provided from your e-mail provider.
NOTE: If the account is set up successfully, you will be prompted to send and receive
e-mail. If not, you must tap Next and set up the account manually which is described in the
following pages. You will need to enter your user name and password for your
e-mail account.
Setup an Internet e-mail account manually
Before you set up your Internet e-mal account, ensure that you have the
necessary nformaton as lsted n the table below. Usually, the manual setup s
needed f the automatc setup faled as descrbed n the prevous secton.
Setting Description
User name Usually the fi rst part of your e-mail address, which appears before the at
sgn (@).
Password Choose a strong password. You wll have the opton to save your password so
that you do not need to enter t each tme you connect to your e-mal server.
Doman Ths may or may not be requred by your Internet Servce Provder.
Server type The type of e-mal server that hosts your malbox (POP3 or IMAP4).
Account name A name for ths account. You must use a dfferent name for each account
that you setup.
Network The type of network your e-mal server connects to.
Incomng mal server The name of your e-mal server (POP3 or IMAP4).
Requre SSL connecton Select ths to ensure you always receve e-mal for ths account usng an
SSL connecton. Ths enables you to receve personal nformaton more
securely. Please note that f you select ths and your ISP does not support
an SSL connecton, you wll not be able to connect to receve e-mal.
Outgong mal server The name of your outgong e-mal server (SMTP).
Outgong server requres
authentcaton Your outgong e-mal server (SMTP) may requre authentcaton. Note: Your
user name and password from above wll be used.