i-mate JAMA, User Manual, Page: 107 / 176

Synchronising 101
Connecting to a PC using bluetooth
Follow the instructions in ActiveSync Help on the PC for confi guring Bluetooth on your PC
to support ActiveSync. Make sure that your PCs Bluetooth is set to Visible (also known as
‘Discoverable’), and that ActiveSync on the PC has the Bluetooth COM port enabled –
see below.
From the device’s Today screen, click Start > Programs > ActiveSync.
Click Menu > Connect via Bluetooth. Ensure that the phone and PC are within
close range.
If this is the fi rst time you have connected to this PC via Bluetooth, you must complete the
Bluetooth wizard on the phone and setup a Bluetooth partnership with the PC
before synchronising.
Click Sync.
When fi nished, click Menu > Disconnect Bluetooth.
To preserve battery power, turn off Bluetooth.
Ensure that the PC ActveSync Seral port corresponds to the PC’s Bluetooth
Serial port confi guration. In the example below, the Bluetooth Serial Port has
already been set up as COM4 by the computer. Because COM4 s allocated
to Bluetooth, the ‘Allow connectons to one of the followng’ has been set to
‘COM4’ to match ths.
1.
2.
3.
4.
5.
6.
7.