i-mate JAMA 101, User Manual

Page: 47 / 152

JAMA101
Chapter 4. Getting Connected
To start browsing the Internet or private network, tap Start > Internet
Explorer.
Connect to a VPN from the internet
Please ensure that you have setup a successful GPRS connection. The
VPN connection uses the existing Internet connections to connect to your
Work Network. Please refer to the next section “Connect to Intranet URLs”
for further information on this subject.
1. If the Work Connection is not being used for any other connection, tap
on “Add a new VPN sever” connection and skip to step 4.
2. Start > Settings > Connections > Connections > Tasks.
3. Create a new connection to a private network pressing “Add a new
modem connection”. This new network connection must be selected
in this menu when required to connect to VPN. Assign a name of your
choice and tap on the VPN tab. Then press New.
4. Complete the VPN setup wizard using the settings provided by your
network administrator, which should include: Host Name/IP, VPN
Type, User Name, Password and Domain.
5. If you selected IPSec VPN type, press next to select the type of
authentication required. If Pre-Shared key is selected, enter the key.
6. Check the advanced settings and complete the settings according to
the instructions from your network administrator.
47
i-mate
™