home
home
9
I N T E R A C T I V E U S E R G U I D E
HOW TO SET UP YOUR RECEIVER
The LED indicator
on the front panel will light up to confi rm
you have connected your receiver correctly to the TV set and
plugged into the mains. The
Welcome Screen
should then appear
on your TV screen after a few seconds. Wait until this Welcome
Screen disappears and is replaced by the
Select On-Screen
Language
screen. If however the Welcome Screen does not appear
in the fi rst place, this may indicate that the receiver’s resolution
should be changed.
CHANGING RESOLUTION
If necessary change the resolution by pressing twice the
button
on the remote control or on the front panel. Press the button once
to show the current resolution mode on both the receiver’s display
and on the TV screen. Press this button again to change the mode
- the name of the new mode will blink for a few seconds while this
is happening.
FIRST TIME INSTALLATION
Select On-screen Language
The
Select On-screen Language
screen allows you to set the
language you want to display on-screen information.
Press
or
to highlight the on-screen language and press
to make your selection.
Please note that you can also change the on-screen language in the Language
Options screen (Select Your
Preferences
from the
Main Menu
).
Antenna Power
This switch is for use if you have an active, or powered, antenna to
amplify the signal, and if this antenna uses the receiver’s 5V power
supply. You then set the
Antenna Power
to
On
, but then you
must
not
connect the antenna to the mains.
Please note that you can also change antenna power settings in the
‘Systems Settings’ menu, choosing
Installation
, and then
System Settings
.
Select TV Screen Format
This window allows you to adjust the shape of your TV display.
Channel Numbering Method
You can arrange your channels in two ways.
•
If you choose
Broadcaster Preferences
, the channels will be
numbered as the broadcaster set them.
•
If you choose
Regular Numbering
, the channels will be numbered
in the order they are found during the channel search process.
Changing to DVI mode
Your receiver supports two standards for transmitting high
defi nition signals to your TV, HDMI (High Defi nition Multimedia
Interface), and DVI (Digital Visual Interface). HD ready TVs usually
support HDMI, but you can toggle between the two modes using
the
button. So to change your receiver from HDMI mode
to DVI mode press and hold the
button until you see ‘DVI’
displayed on the front panel. Similarly press and hold the
button to change from DVI to HDMI.
S E T T I N G U P
