USER GUIDE
1850S
21
■
Unicable Channel Frequency
- once you select the Channel
Number the decoder assumes standard frequency for this
number. However, you can change it by editing this option.
■
Unicable LNB
- press
key on the remote control to gain
access to more advanced configuration of the LNB. Use this
option when you have a non standard LNB.
DiSEqC
DiSEqC control type allows you to connect up to 4 satellite signals.
In this case you need a dedicated DiSEqC switch, controlled by the
decoder, to manage the satellite signals. You can configure each
of the 4 LNBs by pressing
key on the remote control.
Tone Burst
this control type also known as miniDiSEqC can be used to allow
your receiver to connect to 2 satellite signals, for example to a
dual-feed antennna. You can also configure each of the 2 LNB by
pressing
key on the remote control.
Please note that one of the LNB must be set to receive
signal from Hotbird satellite. In other case the decoder
will not be able to find channels.
Summary of Contents for 1850S
Page 1: ...1850S 1 USER GUIDE 1850S ...
