20
OTHER FUNCTIONS
SCREEN SAVER AND BANNER DURATION
Banner Duration
The Banner Duration option allows you to decide how long
channel information is displayed after tuning to another channel.
If the Disabled option is assigned to the Banner Duration option,
the information will not be displayed.
Screen Saver
Some TV screens may suffer “screen burn-in” when static images
are displayed for a long time. To prevent this effect, after the time
specified in the Screen Saver option, most of the TV screen gets
dark.
TV SETTINGS
TV Screen Format
If you have changed the TV and its format is different than the
one chosen during the First Time Installation, adjust the TV Screen
Format option to correspond with the format of the TV you are
currently using.
Display Format
If your TV screen format is different than the format of the
program currently broadcast, you can choose the way the picture
is ‘transformed’. You can choose between Full Screen, Letter-Box
and Pan-Scan.
SATELLITE ANTENNA CONFIGURATION
In the Antenna Configuration screen you can adjust the settings
of your antenna. The following options are available:
Antenna Power
- this option by default is switched to On and it
should not be changed if you have only one receiver connected
to the antenna signal. However, in case you use two receivers
connected to the same LNB and the signal is split then on one of
the receivers this option needs to be switched off.
Antenna Control
- allows you to select the type of control
depending on the installation you have. You can choose between:
None
Select this option if there is only one LNB to receive one satellite
signal is present in the antenna system
Unicable
Unicable control type allows you to receive signal from multiple
satellites with the use of only one cable. In order to use Unicable
technology, a dedicated LNB must be connected to the receiver
and the following parameters must be set properly:
■
Unicable Channels
- select the number of channels of your
Unicable LNB. You can choose between 4 and 8.
■
Channel Number
- select the appropriate output number of
the LNB your receiver is connected to.
Summary of Contents for 1850S
Page 1: ...1850S 1 USER GUIDE 1850S ...
