11
HOW TO SET UP YOUR RECEIVER
The LED indicator on the front panel will light up to confirm you
have connected your receiver to the power source. The Welcome
Screen should then appear on your TV screen after a few seconds.
Wait until this Welcome Screen disappears and is replaced by
the Select On-Screen Language screen. If however the Welcome
Screen does not appear in the first place, this may indicate that the
receiver’s resolution should be changed.
CHANGING RESOLUTION
If necessary change the resolution by pressing twice the
button on the remote control. Press the
button once to show
the current resolution mode on the TV screen. Press this button
again to change the mode.
FIRST TIME INSTALLATION
Select On-screen Language
The Select On-screen Language screen allows you to set the
language you want to display on-screen information. Press
to highlight the on-screen language and press
to make your
selection. Please note that you can also change the on-screen
language in the Language Options screen (Select Your Preferences
from the Main Menu).
FIRST INSTALLATION
Select TV Screen Format
This window allows you to adjust the shape of your TV display.
Numbering Method
You can arrange your channels in two ways.
■
If you choose Automatic Order, the channels will be num-
bered as the broadcaster set them.
■
If you choose No Order, the channels will be numbered in the
order they are found during the channel search process.
Installation
This screen allows you to choose two types of Installation:
■
Standard
■
Advanced - this screen allows you to set up your satellite an-
tena. Use if you need special configuration or have a different
installation type e.g. Unicable.
Summary of Contents for 1850S
Page 1: ...1850S 1 USER GUIDE 1850S ...
