![background image](http://html.mh-extra.com/html/i-bus/ibc-2600/ibc-2600_user-manual_602023036.webp)
Chapter 2 - System BIOS
2-2
IBC 2600 User’s Guide
NOTE: When you perform a warm boot by pressing
<Ctrl> + <Alt> + <Del>, all memory tests are bypassed.
AMIBIOS checks all system and cache memory and reports them on
both the initial AMIBIOS screen and the AMIBIOS System Configuration
screen which appears after POST is completed. AMIBIOS attempts to
initialize the peripheral devices by verifying the validity of the system set-
up information stored in the system CMOS RAM. (See the
Running AMI-
BIOS
Setup section of this manual.) If AMIBIOS detects a fault, the
screen displays the error condition(s) which has/have been detected. If
no errors are detected, AMIBIOS attempts to load the system from any
bootable device, such as a floppy disk or hard disk.
Normally, the only POST routine visible on the screen is the memory
test. The following screen displays when the system is powered on:
Summary of Contents for IBC 2600
