manualshive.com logo in svg

I-Bus IBC 2600, User Manual, Page: 2 / 140

Share
Download
I-Bus IBC 2600 User Manual Download Page 2

Copyright 200

1

 

Doc No. 

095-200

81

-00

 Rev.

B

All Rights Reserved 
The information in this document is subject to change without prior notice in order to 
improve reliability, design, and function, and does not represent commitment on the part of 
the manufacturer.  In no event will the manufacturer be liable for direct, indirect, special, 
incidental, or consequential damages, or the possibility of such damages, arising out of the 
use of this information. 
This document contains proprietary information protected by copyright.  All rights are 
reserved.  No part of this manual may be reproduced by any mechanical, electronic, or 
other means in any form without prior written permission of the manufacturer. 
 

Trademarks

 

IBM PC is a registered trademark of International Business Machines Corporation.  Intel 
and Pentium are registered trademarks of Intel Corporation.  Award is a registered 
trademark of Award Software, Inc.  Other product names mentioned herein are used for 
identification purposes only and may be trademarks and/or registered trademarks of their 
respective companies. 

Customer Service 

 

Worldwide Headquarters 

I-Bus Corporation 
2391 Zanker Road #380 
San Jose 
CA 95131, USA 
Tel: +(1) 408 428 6100 
Fax: +(1) 408 428 6101 

Toll Free: 877-777-IBUS 

Email: [email protected] 

 
European Headquarters 

I-Bus 
Unit 6, Chichester Business Park 
City Fields Way, Tangmere 
West Sussex, PO20 2LB, UK 
Tel: +44 (0) 1243 756300 
Fax: +44 (0) 1243 756301 
Email: [email protected] 
 

France, Italy 

I-Bus 
B.P 45 Valbonne 
06901 Sophia Antipolis CEDEX 
France 
Tel: +33 (0) 493 004 360 
Fax: +33 (0) 493 004 369 
Email: [email protected] 
 
Other countries, contact [email protected] 
 
 

 

Summary of Contents for IBC 2600













































































































































Reviews:

No comments