HYVOX 3W LED Flashlight User Manual
Unscrew and remove the end cap.
Remove the old battery and insert
it into the charging unit in correct
polarity.
Both green and red LED on the charging unit will light on and the
green LED starts to flash indicating the battery is charging.
The battery is fully charged when the green LED stops to Flash. Do
not discontinue charging until the battery has been fully charged.
This will ensure good life for your battery.
Unscrew and remove the end cap. (Figure 1)
Remove the old battery and insert new battery (3.6V 2.0AH Ni-MH
battery), positive end of battery first. Then replace the end cap.
CHARGING BATTERY
01.
02.
03.
04.
01.
02.
BATTERY REPLACEMENT
Figure 1
Figure 2
06.
