EN - 30
The use of 1.5m cord Temperature Probe:
Insert the probe plug (D9) on the right hand side of the Thermo Sensor Unit.
Put the metal casing outside and leave the Thermo Sensor Unit in an indoor area to avoid
freezing up the battery when the outdoor temperature is below -20 °C.
Always use the temperature probe to sense the temperature when the temperature is between
the following range: -50 °C ~ 0°C and +50°C ~ + 70°C
Radio Controlled Clock:
At 2 minutes after batteries inserted, the clock automatically starts scanning the DCF time
signal
“ ” flashes indicate now is receiving DCF signal
“ ” turns on indicate signal received successfully
If reception fail, scanning stops “ ” disappear on the LCD ) and repeats again at next hour.
Totally four reception will be tried after starting. Each reception takes about 10 minutes.
The clock automatically scans the time signal at 3.00 a.m. everyday to maintain accurate tim
-
ing. If reception fail,, scanning stops “ ” on the LCD disappear ) and repeats again at 4.00
a.m. 5.00a.m. and 6.00a.m.
The clock can be set to scans the time signal manually by holding “▼” button (B5) for 3 sec
-
onds. If receptions fail, scanning stops. “ ” on the LCD disappear ).
Hold “▼” button (B5) for 3 seconds or enter Time Setting to stop scanning DCF time signal.
Buttons will not function while scanning for DCF time signal unless they are well received or
stopped manually.
“DST” shown on the LCD if it is in Daylight Saving Time Mode
Manual Time Setting:
Hold “ MODE” button (B6) for 3 seconds to enter Clock/Calendar setting Mode .
Press “▲” (B3) or “▼” (B5) buttons to adjust the setting and press “MODE/SET” button (B6)
to confirm each setting.
The setting sequence is shown as follow:
Hour, Minutes, Second, Year, Month, Day, Day-of-week language, Country,City and Time
Zone.
8 languages can be selected in Day-of-week, they are: German, English, Russian, Denmark,
Dutch, Italian Spanish and French,. The languages and their selected abbreviations for each
day of the week are shown in the following table.
The Time zone is used for the countries where can receive the DCF time signal but the time
zone is different from the German time.
When the country time is faster than the German time for 1 hr, the zone should be set to +1.
Then the clock will automatically set 1 hour faster from the signal time received.
The time setting mode will automatically exit in 15 seconds without any adjustment.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Language
Sunday Monday Tuesday Wednesday Thursday Friday Saturday
German, GE
SO
MO
DI
MI
DO
FR
SA
English, EN
SU
MO
TU
WE
TH
FR
SA
Russian, RU
BC
NH
BT
CP
HT
NT
CY
Denmark, DA
SO
MA
TI
ON
TO
FR
LO
Dutch, NE
ZO
MA
DI
WO
DO
VR
ZA
Italian, IT
DO
LU
MA
ME
GI
VE
SA
Spanish, ES
DO
LU
MA
MI
JU
VI
SA
French, FR
DI
LU
MA
ME
JE
VE
SA
Summary of Contents for WS 1806 BOY
Page 46: ...Pozn mky Notes Notatka...
Page 47: ...Pozn mky Notes Notatka...
Page 48: ...Seoul Korea...