44
ENG
Settings for navigation
Trail
To enable the trail function, you can log the trail.
You can set the file name to save, interval and
file size.
When the file size reach the set value, the
navigation system stops logging the trail.
1. Press
[ ] > [Trail].
2. Select the desired options by pressing
[
D
]/[
a
]/[
d
], then press [Start Log].
•
[Name]: Change the trail’s name, then
press [Done].
•
[Interval]: Set the interval as 1sec, 3secs,
5secs, 10secs, 1min, 5mins.
•
[File Size]: Set the file size as 1M, 5M,
10M.
3. Press [Trail] > [Stop Log] if you want to stop
the log.
Factory Default
If you would like to clear all the settings in
the navigation system, you could restore them
through the factory default menu.
Press [ ] > [Factory Default] > [Yes] > [OK].
Safe Mode
This menu allow you not to touch the screen
when the vehicle speed is above 40km/hr. This is
to prevent you form dangerous operation when
driving.
To touch the screen is possible when the vehicle
speed is below 40km/hr.
1. Press
[ ] > [Safe Mode].
2. Set the safe mode as On/Off by pressing
[
a
]/[
d
], then press [Apply].
