2-20
Safety system of your vehicle
Front seat warmers (if equipped)
While the power cell module is run-
ning, push either of the switches to
warm the driver's seat or front pas-
senger's seat.
During mild weather or under condi-
tions where the operation of the seat
warmer is not needed, keep the
switches in the OFF position.
Each time you push the switch, the
temperature setting of the seat is
changed as follows :
The seat warmer defaults to the OFF
position whenever the ignition switch
is placed in the ON position.
✽
✽
NOTICE
With the seat warmer switch in the
ON position, the heating system in
the seat turns off or on automatical-
ly depending on the seat tempera-
ture.
OLMB033014
OFF
→
HIGH (
)
→
LOW (
)
→
NEVER place anything on the
seat that insulates against heat
when the seat warmer is in oper-
ation, such as a blanket or seat
cushion. This may cause the
seat warmer to overheat, caus-
ing a burn or damage to the seat.
WARNING
To prevent damage to the seat
warmers and seats:
•
Never use a solvent such as
paint thinner, benzene, alco-
hol or gasoline to clean the
seats.
•
Do not place heavy or sharp
objects on seats equipped
with seat warmers.
CAUTION
Summary of Contents for Tucson 2015
Page 353: ...I Index I...