manualshive.com logo in svg

Hyundai Tucson 2015, Owner'S Manual

The Hyundai Tucson 2015 Owner's Manual is an essential guide for all owners of this versatile SUV. Easily download the manual for free from manualshive.com to learn about all the features and maintenance tips to keep your Tucson running smoothly. Get your copy today and drive with confidence!

Share
Download
background image

2-27

Saf

ety system of y

our v

ehicle

2

The Pre-Tensioner Seat Belt System
consists mainly of the following com-
ponents. Their locations are shown in
the illustration above:
1. SRS air bag warning light
2. Retractor pre-tensioner assembly
3. SRS control module
4. Anchor pre-tensioner assembly

✽

✽

NOTICE

The sensor that activates the SRS air
bag is connected with the pre–ten-
sioner seat belts. The SRS air bag
warning light on the instrument panel
will illuminate for approximately 6
seconds after the ignition switch is
placed in the ON position, and then it
should turn off.
If the pre-tensioner is not working
properly, the warning light will illu-
minate even if the SRS air bag is not
malfunctioning. If the warning light
does not illuminate, stays illuminated
or illuminates when the vehicle is
being driven, have an authorized
HYUNDAI Tucson Fuel Cell dealer
inspect the pre-tensioner seat belts
and SRS air bags as soon as possible.

Do not touch the pre-tensioner
seat belt assemblies for several
minutes after they have been
activated. When the pre-ten-
sioner seat belt mechanism
fires during a collision the pre-
tensioner becomes hot and can
burn you.

WARNING  

1LDE3100/Q

Summary of Contents for Tucson 2015











































































































































































































































































































































































Reviews:

No comments

Related manuals for Tucson 2015

OEM Audio Reference Series Manual preview
Reference Series
Brand: OEM Audio Pages: 29
Triumph MAYFLOWER 1951 Instruction Book preview
MAYFLOWER 1951
Brand: Triumph Pages: 86
Axxess AX-LR904 Installation Instructions Manual preview
AX-LR904
Brand: Axxess Pages: 8
SeaSucker SX6150 Quick Start Manual preview
SX6150
Brand: SeaSucker Pages: 9
Compass 02106 Manual preview
02106
Brand: Compass Pages: 16
Kargo Master 4A82T Installation Manual preview
4A82T
Brand: Kargo Master Pages: 6
muth signal mirror Instalation Instructions preview
signal mirror
Brand: muth Pages: 10
GMC Envoy XUV 2004 Getting To Know Manual preview
Envoy XUV 2004
Brand: GMC Pages: 20
Vauxhall Meriva 2014 Infotainment Manual preview
Meriva 2014
Brand: Vauxhall Pages: 131
Hyundai Entourage 2008 Quick Reference Manual preview
Entourage 2008
Brand: Hyundai Pages: 11
Draw tite 24963 Installation Instructions preview
24963
Brand: Draw tite Pages: 4
EFILive CM2350B User Manual preview
CM2350B
Brand: EFILive Pages: 25
Audiovox AA-BAT Programming Manual preview
AA-BAT
Brand: Audiovox Pages: 3
Victory 4x4 VRKCAP Install Instructions Manual preview
VRKCAP
Brand: Victory 4x4 Pages: 9
Ford FUSION 2014 Owner'S Manual preview
FUSION 2014
Brand: Ford Pages: 458
ULTIMATE SPEED 285690 Assembly And Safety Advice preview
285690
Brand: ULTIMATE SPEED Pages: 10
WATT CARWATT CV12-220C150 User Manual preview
CARWATT CV12-220C150
Brand: WATT Pages: 26
Kia OPTIA hybrid 2020 Features & Functions Manual preview
OPTIA hybrid 2020
Brand: Kia Pages: 54

Brands by name

Popular brands

Load more brands