manualshive.com logo in svg

Hyundai Tiburon, Owner'S Manual

The Hyundai Tiburon Quick Reference Manual is an essential companion for Tiburon owners, providing detailed instructions and valuable information about their vehicle. Easily download this manual for free from our website, ensuring you have all the necessary knowledge to confidently navigate your Hyundai Tiburon.

Share
Download
background image

8

CONSUMER INFORMATION, REPORTING SAFETY DEFECTS & BINDING ARBITRATION OF WARRANTY CLAIMS

11

I070A01A-AAT

TIRE BALANCING

A tire that is out of balance may affect
handling and tire wear. The tires on your
Hyundai were balanced before the car
was delivered but may need balancing
again during the years you own the car.
Whenever a tire is dismounted for re-
pair, it should be rebalanced before
being reinstalled on the car.

!

WARNING:

o Do not use the temporary spare

tire for tire rotation.

o Do not mix bias ply and radial ply

tires under any circumstances.
This may cause unusual handling
characteristics that could result in
death, serious injury, or property
damage.

!

WARNING:

When rotating the 215/45 R17 tires,
the tires must be mount following
the "ROTATION" direction marked
on the sidewall of the tires.
If rotating the tires from the left side
to the right side and from the right
side to the left side, separate the
wheel from the tire and then remount
them.

Sidewall

HGK5018

Tire rotation
direction

I080A01A-AAT

TIRE TRACTION

Tire traction can be reduced if you drive
on worn tires, tires that are improperly
inflated or on slippery road surfaces.
Tires should be replaced when tread
wear indicators appear. To reduce the
possibility of losing control, slow down
whenever there is rain, snow or ice on
the road.

Summary of Contents for Tiburon











































































































































































































































































Reviews:

No comments

Related manuals for Tiburon

PAC I GM3 Instruction Manual preview
I GM3
Brand: PAC Pages: 15
Monacor CARPOWER CAP-12XHQ Manual preview
CARPOWER CAP-12XHQ
Brand: Monacor Pages: 5
Jeep Grand Cherokee WK2 Owner'S Manual preview
Grand Cherokee WK2
Brand: Jeep Pages: 338
Club Car Gasoline/Electric DS Golf Car 1996 Owner'S Manual preview
Gasoline/Electric DS Golf Car 1996
Brand: Club Car Pages: 48
Subaru Impreza 2.5GT Specifications preview
Impreza 2.5GT
Brand: Subaru Pages: 2
Subaru 1999 Impreza Owner'S Manual preview
1999 Impreza
Brand: Subaru Pages: 328
Hudson 1933 Eight Owner'S Manual preview
1933 Eight
Brand: Hudson Pages: 34
Acura 08L07-TA1-203 Installation Instructions Manual preview
08L07-TA1-203
Brand: Acura Pages: 6
Saab 32 025 603 Installation Instructions Manual preview
32 025 603
Brand: Saab Pages: 15
WATT CARWATT CV12-220C150 User Manual preview
CARWATT CV12-220C150
Brand: WATT Pages: 26
Huf HUF8432MS Technical Description And User Manual preview
HUF8432MS
Brand: Huf Pages: 6
Z Flash OBD-II STALK User Manual preview
OBD-II STALK
Brand: Z Flash Pages: 4
Classic AutoAir Mustang 1969 Installation Manual preview
Mustang 1969
Brand: Classic AutoAir Pages: 44
Volvo V70 2014 Quick Manual preview
V70 2014
Brand: Volvo Pages: 16
SIXTOL DRY CAR Instructions For Use Manual preview
DRY CAR
Brand: SIXTOL Pages: 32
Beeper KMX250 Quick Manual preview
KMX250
Brand: Beeper Pages: 2
Kargo Master 409CD Installation Manual preview
409CD
Brand: Kargo Master Pages: 7
Technaxx FMT1200BT User Manual preview
FMT1200BT
Brand: Technaxx Pages: 59

Brands by name

Popular brands

Load more brands