manualshive.com logo in svg

Hyundai Tiburon, Owner'S Manual

The Hyundai Tiburon Quick Reference Manual is an essential companion for Tiburon owners, providing detailed instructions and valuable information about their vehicle. Easily download this manual for free from our website, ensuring you have all the necessary knowledge to confidently navigate your Hyundai Tiburon.

Share
Download
background image

3

4

WHAT TO DO IN AN EMERGENCY

IF THE ENGINE OVERHEATS

!

!

WARNING:

While the engine is running, keep hair,
hands, and clothing away from moving
parts such as the fan and drive belts to
prevent injury.

5. If the water pump drive belt is broken or

engine coolant is leaking out, stop the engine
immediately and call the nearest Hyundai
dealer for assistance.

WARNING:

Do not remove the radiator cap when the
engine is hot. This can allow coolant to be
blown out of the opening and cause seri-
ous burns.

D030A02A-AAT

If your temperature gauge indicates overheat-
ing, you experience a loss of power, or hear loud
pinging or knocking and the engine is probably
too hot. If this happens and, you should:

1. Pull off the road and stop as soon as it is safe

to do so.

2. Place the gear selector lever in "P" (auto-

matic), or neutral (manual transaxle) and set
the parking brake. If the air conditioning  is on,
turn it off.

3. If engine coolant is running out under the car

or  steam is coming out from the hood, stop
the engine. Do not open the hood until the
engine coolant has stopped running or the
steaming has stopped. If there is no visible
loss of engine coolant and no steam, leave
the engine running and check to be sure the
engine cooling fan is operating.  If the fan is
not running, turn the engine off.

4. Check to see if the water pump drive belt is

missing. If it is not missing, check to see that
it is tight. If the drive belt seems to be
satisfactory, check for engine coolant leak-
ing from the radiator, hoses or under the car.
(If the air conditioning had been in use, it is
normal for cold water to be draining from it
when you stop).

6. Carefully remove the jumper cables in the

reverse order of attachment.

If you do not know why your battery became
discharged (because the lights were left on,
etc.), have the charging system checked by
your Hyundai dealer.

Summary of Contents for Tiburon











































































































































































































































































Reviews:

No comments

Related manuals for Tiburon

Daihatsu G200 Service Manual preview
G200
Brand: Daihatsu Pages: 485
Yakima SkyBox 12 Installation Instructions Manual preview
SkyBox 12
Brand: Yakima Pages: 6
Yakima HoldUp Plus2 Manual preview
HoldUp Plus2
Brand: Yakima Pages: 18
TrailFX A4012S Installation Instructions Manual preview
A4012S
Brand: TrailFX Pages: 6
kincrome K12071 Owner'S Assemble And Operating Manual preview
K12071
Brand: kincrome Pages: 6
walser 30968 User Instructions preview
30968
Brand: walser Pages: 24
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
Yakima Prorack K436 Fitting Instructions Manual preview
Prorack K436
Brand: Yakima Pages: 13
Thetford SANICON TURBO 300 Operating Instructions Manual preview
SANICON TURBO 300
Brand: Thetford Pages: 25
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
Rally Armor IMF63 Installation Instruction preview
IMF63
Brand: Rally Armor Pages: 4
ECS Electronics TO-245-BHU Fitting Instructions Manual preview
TO-245-BHU
Brand: ECS Electronics Pages: 14
VDO TRIM GAUGE Installation Instructions Manual preview
TRIM GAUGE
Brand: VDO Pages: 6
Cadillac 2013 Cadillac CTS-V Specifications preview
2013 Cadillac CTS-V
Brand: Cadillac Pages: 6
Honda 2013 Civic Coupe Technology Reference Manual preview
2013 Civic Coupe
Brand: Honda Pages: 13
GMC 2013 Terrain Owner'S Manual preview
2013 Terrain
Brand: GMC Pages: 364
CANchecked VADpro VAD28 Quick Start Manual preview
VADpro VAD28
Brand: CANchecked Pages: 4
Metra Electronics KIA OPTIMA 99-7324 Installation Instructions Manual preview
KIA OPTIMA 99-7324
Brand: Metra Electronics Pages: 8

Brands by name

Popular brands

Load more brands