manualshive.com logo in svg

Hyundai Tiburon, Owner'S Manual

The Hyundai Tiburon Quick Reference Manual is an essential companion for Tiburon owners, providing detailed instructions and valuable information about their vehicle. Easily download this manual for free from our website, ensuring you have all the necessary knowledge to confidently navigate your Hyundai Tiburon.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

96

H260B03E-AAT

1. POWER ON-OFF Control Knob

The radio unit may be operated when the ignition
key is in the "ACC" or "ON" position.  Press the
knob to switch the power on. The LCD shows
the radio frequency in the radio mode or the CD
track indicator in either the CD mode or CD
AUTO CHANGER mode. To switch the power
off, press the knob again.

VOLUME Control

Rotate the knob clockwise to increase the
volume and turn the knob counterclockwise to
reduce the volume.

BALANCE Control

Pull and turn the control knob clockwise to
emphasize right speaker sound (left speaker
sound will be attenuated). When the control
knob is turned counterclockwise, left speaker
sound will be emphasized (right speaker sound
will be attenuated).

2. FAD (Fader Control) Knob

Turn the control knob counterclockwise to
emphasize front speaker sound (rear speaker
sound will be attenuated). When the control
knob is turned clockwise, rear speaker sound
will be emphasized (front speaker sound will be
attenuated).

3. BASS Control Knob

Press to pop the knob out and turn to the left or
right for the desired bass tone.

TREB (Treble Control) Knob

Pull the bass control knob further out. Turn to the
left or right for the desired treble tone.

4. SCAN Button

When the scan button is pressed, the frequency
will increase and the receivable stations will be
tuned in one after another, receiving each sta-
tion for 5 seconds. To stop scanning, press the
scan button again.

5. TUNE (Manual) Select Button

Press the (   ) side or (   ) side to increase or to
decrease the frequency. Press either button
and hold down to continuously scroll. Release
button once the desired station is reached.

SEEK Operation (Automatic Channel
Selection)

Press the TUNE select button for 1 sec or more.
Releasing it will automatically tune to the next
available station with a beep sound.
When the (  ) side is pressed longer than 1
second, releasing will automatically tune to the
next higher frequency and when the (    ) side
is pressed longer than 1 second, releasing will
automatically tune to the next lower frequency.

Summary of Contents for Tiburon











































































































































































































































































Reviews:

No comments

Related manuals for Tiburon

OCTO SmartDiag2GO GD201-O User Manual preview
SmartDiag2GO GD201-O
Brand: OCTO Pages: 5
Prorack K748 Fitting Instructions Manual preview
K748
Brand: Prorack Pages: 14
Phonocar 4/084 Mounting Instructions preview
4/084
Brand: Phonocar Pages: 2
Fortin Evo All THAR-FOR3 Installation Manual preview
Evo All THAR-FOR3
Brand: Fortin Pages: 7
Fast Master Products SWIVELWHEEL-46 Assembly Instructions Manual preview
SWIVELWHEEL-46
Brand: Fast Master Products Pages: 13
Camecho R0009 Instructions preview
R0009
Brand: Camecho Pages: 2
Eibach E60-82-007-02-10 Installation Instructions preview
E60-82-007-02-10
Brand: Eibach Pages: 3
Tesla MODEL Y Owner'S Manual preview
MODEL Y
Brand: Tesla Pages: 274
RAM Promaster 2016 User Manual preview
Promaster 2016
Brand: RAM Pages: 148
Hamron 619-626 User Instructions preview
619-626
Brand: Hamron Pages: 36
Aston Martin V8 Vantage Workshop Manual preview
V8 Vantage
Brand: Aston Martin Pages: 415
Guardsman G14776S Fitting Instruction preview
G14776S
Brand: Guardsman Pages: 2
Kargo Master 40983 Quick Start Manual preview
40983
Brand: Kargo Master Pages: 18
Volkswagen Passat 2011 Maintenance Manual preview
Passat 2011
Brand: Volkswagen Pages: 188
Vauxhall Signum Owner'S Manual preview
Signum
Brand: Vauxhall Pages: 310
Whispbar K536W Fitting Instructions Manual preview
K536W
Brand: Whispbar Pages: 17
TOP VEHICLE TECH GRKRT01 Installation Manual preview
GRKRT01
Brand: TOP VEHICLE TECH Pages: 8
Porsche 928 GT - 1991 WIRE DIAGRAM Wiring Diagram preview
928 GT - 1991 WIRE DIAGRAM
Brand: Porsche Pages: 30

Brands by name

Popular brands

Load more brands