manualshive.com logo in svg

Hyundai Tiburon, Owner'S Manual

The Hyundai Tiburon Quick Reference Manual is an essential companion for Tiburon owners, providing detailed instructions and valuable information about their vehicle. Easily download this manual for free from our website, ensuring you have all the necessary knowledge to confidently navigate your Hyundai Tiburon.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

19

C190C03S-AAT

Trailer Brakes

If your trailer is equipped with a braking system,
make sure it conforms to federal and/or local
regulations and that it is properly installed and
operating correctly.

NOTE:

If you tow a trailer or vehicle, your car will
require more frequent maintenance due to
the additional load. See "Maintenance Un-
der Severe Usage Conditions" on page 5-6.

TRAILER OR VEHICLE TOWING

C190A01S-AAT

If you are considering towing with your car, you
should first check with your State's Department
of Motor Vehicles to determine their legal re-
quirements.
Since laws vary from State to State, the require-
ments for towing trailers, cars, other types of
vehicles, or apparatus may differ. Ask your
Hyundai dealer for further details before towing.

CAUTION:

Do not do any towing with your car during
its first 1,200 miles (2,000 km) in order to
allow the engine to properly break in. Fail-
ure to heed this caution may result in seri-
ous engine or transaxle damage.

!

C190B01S-AAT

Trailer Hitches

Select the proper hitch and ball combination,
making sure that its location is compatible with
that of the trailer or vehicle being towed. Use a
quality non-equalizing hitch which distributes
the tongue load uniformly throughout the chas-
sis.

The hitch should be bolted securely to the car
and installed by a qualified technician. DO NOT
USE A HITCH DESIGNED FOR TEMPORARY
INSTALLATION AND NEVER USE ONE THAT
ATTACHES ONLY TO THE BUMPER.

C180A01A-AAT

Check your lights regularly for correct opera-
tion and always keep them clean. When driving
during the day in conditions of poor visibility, it
is helpful to drive with headlights on low beam.
This enables you to be seen, as well as to see.

USE OF LIGHTS

Summary of Contents for Tiburon











































































































































































































































































Reviews:

No comments

Related manuals for Tiburon

Jabra TOUR Get Started preview
TOUR
Brand: Jabra Pages: 10
Vauxhall INSIGNIA 2017 Owner'S Manual preview
INSIGNIA 2017
Brand: Vauxhall Pages: 323
Dynojet 24xLC2 Linx Installation Manual preview
24xLC2 Linx
Brand: Dynojet Pages: 68
Kuda-Phonebase 283410 Installation Instruction preview
283410
Brand: Kuda-Phonebase Pages: 3
Fiat 500 L 2019 User Manual preview
500 L 2019
Brand: Fiat Pages: 172
Honda HondaLink Quick Start Manual preview
HondaLink
Brand: Honda Pages: 6
AC Schnitzer X3 M-Technik Fitting Instructions Manual preview
X3 M-Technik
Brand: AC Schnitzer Pages: 20
Nav TV NAV-INREN Quick Manual preview
NAV-INREN
Brand: Nav TV Pages: 2
EZTRUNK PHANTOM JK Assembly Manual preview
PHANTOM JK
Brand: EZTRUNK Pages: 3
Simplicity 1694286 Installation Instructions Manual preview
1694286
Brand: Simplicity Pages: 10
Quadratec 16053.5300 Installation Manual preview
16053.5300
Brand: Quadratec Pages: 6
FVC Sprinter Side Ladder Installation Manual preview
Sprinter Side Ladder
Brand: FVC Pages: 8
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146
Fiat 500L 2020 Owner'S Manual preview
500L 2020
Brand: Fiat Pages: 284
Chrysler Dodge Caravan 2002 Manual preview
Dodge Caravan 2002
Brand: Chrysler Pages: 2399
Ednet 84104 User Manual preview
84104
Brand: Ednet Pages: 6
Phonocell 6/821 Mounting Instructions preview
6/821
Brand: Phonocell Pages: 8
Waeco MAGIC WATCH MWE-850-4XXL Installation And Operating Manual preview
MAGIC WATCH MWE-850-4XXL
Brand: Waeco Pages: 228

Brands by name

Popular brands

Load more brands