ENG - 27
ENG
ADVICE FOR GOOD IRONING
We recommend using the lowest temperatures with fabrics that have unusual finishes
(sequins, embroidery, flush, etc.).
If the fabric is mixed (e.g. 40% cotton 60% synthetics), set the thermostat to the temperature
of the fibre requiring the lower temperature.
If you don’t know the composition of the fabric, determine the suitable temperature by testing
on a hidden corner of the garment. Start with a low temperature and increase it gradually until
it reaches the ideal temperature.
Never iron areas with traces of perspiration or other marks: the heat of the plate fixes the
stains on the fabric, making them irremovable.
To avoid marking silk, woolen or synthetic garments shiny, iron them inside out.
To avoid marking velvet garments shiny, iron in one direction (following the fibre) and do not
press down on the iron.
The heavier the washing machine is loaded, the more garments come out creased. This also
happens when the spin drying revolutions are very high.
Many fabrics are easier to iron if they are not completely dry.
For example, silk should always be ironed damp.
Cleaning and Maintenance
AFTER USE
Set the steam selector knob to
.
Disconnect from the mains supply.
Open the water fillinginletcover.
Invert iron and shake the iron to empty the water tank, and then stand the iron in a upright
position to allow to cool.
In order to save space, the power cord may be easily wound around the cord stowage facility
after the iron has been cooled.
Always store the iron (with water empted from water tank) on its heel rest, not on the solepla
-
te. Even the smallest amount of moisture will cause corrosion and staining of the soleplate if
the iron is stored with the soleplate facing downwards.
Any deposits, starch residue or size left on the plate can be removed using a damp cloth or
an unabrasive liquid detergent.
The plastic parts can be cleaned with a damp cloth then wiped over with a dry cloth.
CARE AND CLEANING
Disconnect from the mains supply by removing the plug.
Certain fabric finishresiduesmaybuilduponthesoleplate,thesemayberemovedby cleaning with a
rough cloth soaked in a vinegar water solution. Dry with a cloth.
Do not use abrasives or scouring pads to clean the soleplate. Keep the soleplate smooth:
avoid hard contact with metal objects. Do not scratch or damage the surface of the soleplate.
Wipe the outside housing with a damp cloth and polish with a dry one. Do not use abrasives
or harsh cleaners as they may damage the surface of the iron.
Avoid scratching the plate with steel wool or metallic objects.
Do not put vinegar or other descaling agents into the water tank.
To clean steam holes - simply use a damp cloth to wipe away any build up of lint or starch
from inside steam holes.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Summary of Contents for SI 160
Page 33: ...Pozn mky Notatka Notes...
Page 34: ...Pozn mky Notatka Notes...
Page 35: ...Pozn mky Notatka Notes...
Page 36: ...Seoul Korea...
