![background image](http://html1.mh-extra.com/html/hyundai/si-160/si-160_instruction-manual_2196573025.webp)
ENG - 25
ENG
FILLING WITH WATER
First ensure that the iron is disconnected from the electricity
supply before fillingwithwater.
Set the Steam Selector to position
Open the water fillingin letcover, hold the iron on an angle
45°. Slowly pour the water into the reservoir using the spe
-
cial filling beaker and taking care not to go over the maxi
-
mum level (about 150 ml) indicated by “MAX” on the tank.
Push firmly to close the water filling inlet cover.
During the ironing process, always ensure there is sufficient
water in the water tank.
SETTING THE TEMPERATURE
First sort items to be ironed, according
to the International Textile Care Labeling
Code.
Use
Stand the iron on its heel and turn the
temperature dial to minimum. Plug the
cord into an electrical outlet.
Select the temperature setting
required by rotating the temperature
dial (pic.2) so that the desired setting
is aligned with the heating indicator
P12.
The heating indicator light will glow
showing that the iron is heating up.
When it goes out, the iron has rea
-
ched the selected temperature and is
ready for use. The light will glow and
go out as the thermostat maintains the
selected temperature.
IMPORTANT:
The steam iron incorporate a thermal
safety fuse to protect the steam iron
from over-heating. However, the iron
should not be left unattended while it is
connected to an electrical outlet. Special
care should always be taken when there
are children in the home.
•
•
•
•
•
•
•
•
Summary of Contents for SI 160
Page 33: ...Pozn mky Notatka Notes...
Page 34: ...Pozn mky Notatka Notes...
Page 35: ...Pozn mky Notatka Notes...
Page 36: ...Seoul Korea...