Genuine Accessories
#2 Phillips Screwdriver
A. Open driver's door.
B. Insert the Key into the ignition.
Turn the key from OFF to ON position five (5) times within 5 seconds
C. After step 2 within 5 seconds.
Press button on the 1st Remote Start Fob one time.
D. After registering the 1st Remote Start Fob, within another 5 seconds,
Press button on the 2nd Remote Start Fob one time.
E. Verify that both Fobs are functioning correctly by performing lock/unlock
function.
Note: The remote start key Fobs come paired to the system from the
factory, and should not require re-pairing.
Note: The remote engine start system can recognize up to three (3) remotes
Fobs; the kit includes two (2) remote Fobs.
If a new Fob, or additional Fob is needed later, the Fob pairing process should
be done with the original Fob or oldest available Fob.
18
19
GO TO
→
Function Check
A
Remote Start Transmitter Fob Pairing Procedure
(not necessary for new installations - only needed if a fob is replaced)
N
O
T
E
A. Perform the Function Check at the end of the Instructions.
N
O
T
E
A. Reinstall the Lower and Upper Steering Column Shroud removed in Step 7.
B. Dislodge the Driver's Side Door Weatherstrip from the dash area to the
Threshold Panel area.
C. Reinstall the Driver's Kick Panel, Hood Lever and Threshold Panel removed
in step 6.
D. Reinstall all the Electrical Connectors to the Lower Dash Panel.
E. Reinstall the Lower Dash Panel removed in Step 4.
F. Reinstall the Side Dash End Cap Panel and Fuse Panel Cover.
G. Reinstall the Driver's Side Door Weatherstrip.
H. Place the Quick Reference Guide and the Owner’s Guide into the Glove
Box.
I. Attach the Remote Start Fobs to each of the Factory Key Fob Rings.
N
O
T
E
Key 5X
Remote Start Fob
Revision Date
5/03/2018
Page 9 of 11
